An electric actuator is a device that converts electrical energy into mechanical motion, and can be used to control the opening and closing of valves. An electric actuator consists of several components, such as a motor, a gearbox, a limit switch, a position indicator, and a manual override. An electric actuator can offer advantages such as precise control, high efficiency, low maintenance, and easy integration with automation systems.
The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is a product developed and produced by FLOWINN, a high-tech enterprise founded in 2007, specializing in the R&D, manufacturing, sales and service of electric actuators. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is a type of angular travel electric actuator with a clutch handle and a flashlight switching device, which can prevent the handwheel from following and improve the safety of the site. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is mainly based on the use of a two-stage Archimedean worm gear and worm drive, a high strength copper alloy worm gear and worm and other mechanisms, which can rotate the output shaft by 90 degrees and control the valve switch device. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can drive and control the angle of the stroke of the valve opening, such as butterfly valve, ball valve, plug valve and other similar valve applications. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can be widely used in building, water treatment, light industry, medicine and other different fields, and has a warranty of 2 years.
The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator has several features that make it superior to other electric actuators, such as:
• Long Life: The valve operation life can reach more than 20000 times, which is higher than the average life of electric actuators.
• Limit Function: The double CAM and integrated circuit board design can provide a convenient and accurate stroke setting, and can also prevent over-travel and over-torque.
• Operational Safety: The Class H motor, with a thermal protector up to 150°C, can ensure a reliable and stable performance of the electric actuator, and can also protect the motor from overheating and burning.
• Indicator: The 3D indicator can display the valve travel position from all angles, and can also provide a visual feedback of the operation status of the electric actuator.
• Reliable Sealing: The long lasting O shape sealing ring can effectively ensure the water-proof grade of the electric actuator, and can also prevent dust, oil, and corrosion from entering the electric actuator.
• Manual Override: The patented worm gear clutch design can prevent the motorized hand wheel rotation, and can also allow the manual operation of the electric actuator in case of power failure or emergency.
• Worm gear and worm: The two-stage Archimedes worm gear with higher bearing than helical gear design can provide better loading and force efficiency, and can also reduce the noise and vibration of the electric actuator.
• Packaging: The product packaging with pearl cotton can accord with ISO2248 drop test, and can also protect the electric actuator from damage during transportation and storage.
With these features, the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can provide a safe and efficient solution for the valve control and automation.
The process of using the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can be divided into three main steps: installation, operation, and maintenance.
Installation
The first step of using the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is installation. In this step, the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is mounted on the valve and connected to the power supply and the control system. To do this, the user should:
• Choose the appropriate type and size of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, according to the specifications and the requirements of the application.
• Align the output shaft of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator with the valve stem, and fix the electric actuator on the valve flange with bolts and nuts, using a torque wrench.
• Connect the power cable and the control cable of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator to the corresponding terminals of the power supply and the control system, and ensure that the wiring is correct and secure.
• Adjust the stroke of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator by using the double CAM and the integrated circuit board, and set the open and close positions of the valve, according to the instructions of the manual.
• Test the operation of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, by using the manual or the automatic mode, and check if the electric actuator and the valve are working properly and synchronously.
Operation
The second step of using the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is operation. In this step, the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator controls the opening and closing of the valve, according to the commands of the control system or the user. To do this, the user should:
• Monitor the operation status of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, by using the 3D indicator or the monitoring system, and check if the valve travel position and the operation mode are correct and consistent.
• If the control system sends a command to the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator, the electric actuator will receive the signal and rotate the output shaft by 90 degrees, either clockwise or counterclockwise, and drive the valve to open or close accordingly.
• If the user wants to operate the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator manually, the user should switch the flashlight switching device to the manual mode, and use the clutch handle and the handwheel to rotate the output shaft and the valve stem, and open or close the valve as desired.
• If the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator encounters an overcurrent, a short circuit, or a reverse current, the fuse inside the electric actuator will melt and cut off the power supply, and protect the electric actuator and the valve from damage.
Maintenance
The third and final step of using the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is maintenance. In this step, the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is inspected, cleaned, and repaired regularly, to ensure its normal and reliable operation. To do this, the user should:
• Disconnect the power supply and the control system of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator, and wait for the electric actuator and the valve to cool down.
• Check the appearance and the performance of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, and look for any signs of wear, damage, or leakage.
• Clean the surface and the interior of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, and remove any dust, oil, or corrosion, using a soft cloth and a mild detergent.
• Replace the fuse, the O shape sealing ring, or any other parts of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator and the valve, if they are damaged or worn out, using the original or the compatible spare parts.
• Reconnect the power supply and the control system of the EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator, and test the operation of the electric actuator and the valve, and check if they are working properly and synchronously.
Conclusion
The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is a product developed and produced by FLOWINN, a high-tech enterprise specializing in the R&D, manufacturing, sales and service of electric actuators. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator is a type of angular travel electric actuator with a clutch handle and a flashlight switching device, which can prevent the handwheel from following and improve the safety of the site. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can drive and control the angle of the stroke of the valve opening, such as butterfly valve, ball valve, plug valve and other similar valve applications. The EOH10 Series Mechatronics Type S5 Quarter Turn Electric Actuator can be widely used in building, water treatment, light industry, medicine and other different fields.
For more information, please contact us:
Email: sales@flowinn.com / info@flowinn.com
Post time: Jan-24-2024