Among the various types of modern equipment controller devices, the angular stroke electric actuator belongs to one of the more frequent changes in the operating mode, like some first-line manufacturers due to their own large production capacity, in the actual use of the actuator to change the operating mode frequently. In general, no matter how the actuator is operated, the production capacity can be increased, but it should be noted that if the equipment is not set properly, it will often cause torque abnormalities, so how to prevent the equipment torque from abnormal?
First, correctly benchmark torque parameters
When benchmarking torque parameters, it must be ensured that the equipment can be maintained in normal condition and that the torque should not exceed the upper torque that the support rod can withstand. Assuming that the torque parameters cannot be uniformly calibrated, the probability of torque abnormalities will increase, and if the torque cannot be benchmarked due to incorrect parameters, the equipment will have problems such as electric gate jumpers, gear reverse operation, support rod deformation, and even the screws inside the equipment will be broken. Therefore, when benchmarking torque correlation parameters, it is necessary to ensure that the target torque parameters are within the safe value range. Of course, there are some products on the market that can regulate the safety value of torque parameters, but compared with ordinary types of actuators, its price will be more expensive, and companies can choose according to their size.
Second, do not switch the operation form frequently
The main feature of the quarter-turn electric actuator is that the operating form can be changed according to the needs of production, not only through the internal program setting to make the autonomous machinery follow the instructions to complete the automatic operation, but also directly by the external clutch to change the equipment operating state and control manually. However, it is easier to make the support rod affected by torque when switching back and forth, so in order to maintain the normal function of the equipment braking system, it is recommended that the operator do not frequently switch the operating mode of the actuator. In addition, no matter what operating mode is chosen, long-term use will cause wear of parts, which will also easily cause abnormal torque of the equipment, so it is necessary to check the parts of each part when using it.
From the above analysis and explanation of the function selection and torque abnormality of the diagonal stroke electric actuator, it can be understood that if the electric actuator can not correctly set the torque parameters or frequently switch the operating mode, it will easily cause abnormal equipment torque, so in order to avoid equipment torque problems, the staff must strictly follow the equipment operation specifications to operate the equipment.
Post time: Jan-12-2023